Brass Spirit Lamp 100ml
.jpg)
Product Code : SCL-CL-12008
Brass Spirit Lamp 100ml (SKU SCL-CL-12008) is a compact, shatterproof alcohol burner that gives a small, steady open flame for heating and sterilising where no gas line is available. Its solid brass body will not shatter if knocked over, which suits busy student benches. It is designed for students, lab technicians and field researchers in school science, microbiology and college practicals. Science Lab Supplies quotes the lamp from Ambala, India for institutions, tender contractors and distributors, singly or by the bench set.
Specifications
Reservoir, wick and cap details of the 100 mL brass lamp are set out row by row below. In short, a heavy-walled, corrosion-resistant solid brass reservoir takes the fuel, a threaded brass wick holder screws tightly into the neck, a woven cotton wick feeds the flame, and a matching brass snuffer cap puts it out.
| Specification | Value |
|---|---|
| SKU | SCL-CL-12008 |
| Body material | Solid industrial brass, heavy-gauge and corrosion resistant |
| Construction | Shatterproof metal reservoir |
| Fuel capacity | 100 mL |
| Recommended fill | Up to 80% of capacity (about 80 mL) |
| Recommended fuel | Denatured alcohol / industrial ethanol (>90%) |
| Burner mechanism | Screw-in threaded brass wick holder |
| Wick | Thick, woven absorbent cotton |
| Snuffer | Matching brass snuffer cap |
| Base | Wide, flat, anti-tip base |
| Spare wicks | 2 replacement woven cotton wicks |
| Documentation | Laboratory safety handling instruction guide |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Brass Spirit Lamp
The spirit lamp gives gentle, localised heat for short heating tasks in school and college labs and in the field. It can be used to sterilise loops and needles, warm liquids in test tubes and run simple flame and expansion demonstrations, making it practical school chemistry lab equipment in India.
- Microbiology practicals: flaming inoculation loops, spreaders and dissecting needles.
- Class 6–10 science: gentle heating of solutions in test tubes gripped in a Test Tube Holder with Handle, and thermal expansion activities.
- Field and environmental science kits: a portable, non-electric heat source.
Alcohol is flammable. Never refill the lamp while it is lit or still hot, never use petrol, kerosene or lighter fluid, and always put the flame out with the snuffer cap rather than blowing on it. Use it under teacher supervision, with the Fire Extinguisher and Fire-Resistant Silk close by.
Standard Scope of Supply
Each lamp comes with the 100 mL brass body, a matching brass snuffer cap, the threaded brass wick holder core, two replacement woven cotton wicks and a laboratory safety handling instruction guide. The alcohol fuel is poured in by the laboratory before first use.
Packing, MOQ and Lead Time
Quotations are prepared for one lamp or a full set for every bench in a lab. Each states the packing, delivery time and price for the quantity requested, and tripods, wire gauze or other chemistry lab equipment in India can be quoted alongside.
Science Lab Supplies, registered as an exporter and holding an Importer-Exporter Code, can ship to buyers in Malaysia, Peru, Egypt, Iraq, Nigeria and Kenya. Science Lab Supplies is registered for GST (GSTIN 06ADEPJ0574F2ZU). Lamps for each heating bench can be requested on the contact page, collected with tripods in the enquiry cart, or bid for through the lab tender page.
Frequently Asked Questions
What fuel should I use in this lamp?
Use denatured alcohol or industrial ethanol above 90% concentration. Never use petrol, kerosene or lighter fluid, which give off explosive vapours and are unsafe in a spirit lamp.
How full should the lamp be filled?
Fill it to a maximum of about 80% of its 100 mL capacity, roughly 80 mL, then screw the wick holder back in and let the wick soak for 3 to 5 minutes before lighting.
Who supplies the Brass Spirit Lamp 100ml?
This lamp is a bought-in heating item dispatched by Science Lab Supplies from Ambala, India, and it can be priced for schools, colleges and tender buyers with tripods, gauzes and other heating apparatus.
How is the flame put out safely?
Place the brass snuffer cap straight over the burning wick. It smothers the flame and also stops the alcohol evaporating while the lamp is stored between practicals.
Related Burners and Heating Supports
A heating station combines a flame source with a stand and a gauze to hold glassware over it. The items below give glass, metal and gas alternatives plus tripods and wire gauzes, so a complete heating station can be built on one quotation.
- Laboratory Spirit Burner — metal-housed burner whose flame size is set by pulling the wick through the collar.
- Alcohol Lamp — round 150 ml glass lamp with PVC cap.
- Spirit Burner for Science Laboratory — four 100 mL borosilicate lamps with ceramic wick holders.
- Beck Bunsen — 150 mm gas burner with a gas knob and rotating air collar.
- Tripod Stand — three-legged metal platform for hands-free heating.
- Cast Iron Tripod Stand — 120 mm cast iron ring on 200 mm screw-in legs.
- Wire Gauze — non-asbestos metal gauze in a plain pattern.
- Laboratory Wire Gauze Mesh — 150 x 150 mm mesh with a 100 mm ceramic centre.
Browse the full Chemistry Lab range, the Lab Glassware range for vessels to heat, or all school lab equipment.
Last updated: 9 October 2026
500ml.jpg)
