Tilting and Swiveling Vice
Product Code : LSK-MMTM-10608
Tilting and Swiveling Vice (SKU LSK-MMTM-10608) is a machine vice that turns in the horizontal plane and tilts vertically, so a workpiece can be held at a compound angle on a milling, drilling or shaping machine. It is used in machining and tool-room training at ITI centres, polytechnics, engineering colleges and TVET institutes. Science Lab Supplies, working out of Ambala, India, supplies the vice to training institutes, tender contractors and distributors.
Specifications
All four sizes of the tilting and swiveling vice are listed size by size in the table below. In short, it swivels 360 degrees horizontally and tilts 90 degrees vertically with positive locking for heavy loads, has hardened and ground V-grooved jaws, aligns to the machine table by a longitudinal slot, and closes on a fine acme-thread steel screw.
| Specification | Value |
|---|---|
| SKU | LSK-MMTM-10608 |
| Size | 3 in / 4 in / 6 in / 8 in |
| Width of jaws | 75 / 100 / 150 / 200 mm |
| Opening of jaws | 75 / 100 / 150 / 200 mm |
| Depth of jaws | 35 / 38 / 50 / 60 mm |
| Overall length | 270 / 340 / 485 / 635 mm |
| Overall height | 135 / 150 / 195 / 230 mm |
| Tenon slot | 13 / 16 / 20 / 20 mm |
| Approx. weight | 8 / 18 / 42 / 76 kg |
| Horizontal swivel | 360 degrees |
| Vertical tilt | 90 degrees |
| Locking | Positive locking to withstand heavy loads |
| Jaws | Hardened and ground |
| V-grooves | One vertical and two horizontal |
| Alignment | Longitudinal slot for quick alignment to machine tables |
| Screw | Fine acme thread in special steel |
| Crank handle | Steel, with spring-loaded mechanism |
| Surface | Anti-corrosive and anti-abrasion |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Tilting and Swiveling Vice
Trainees clamp a job, set the swivel and tilt to the drawing angle, then mill or drill angled faces, chamfers and holes. It teaches angular setting on the machine table without special fixtures, a routine task in machinist and tool-room work.
- ITI Machinist and Tool and Die Maker trades: milling angled faces and compound-angle features on a Universal Milling Machine.
- Drilling angled holes on the table of an Upright Drilling Machine.
- TVET machining modules: workholding and setting up to drawing angles.
Standard Scope of Supply
The Tilting and Swiveling Vice is supplied as a single vice in the size you order, 3, 4, 6 or 8 inch, with its screw and spring-loaded crank handle. Clamping bolts for your machine table are not included; any optional accessories are shown on the quotation.
Packing, MOQ and Lead Time
Price requests can be for one vice or a mix of sizes for several machines. The quotation spells out packing, delivery time and price for each line, and you can add milling accessories or other TVET workshop equipment to it.
With its Importer-Exporter Code, Science Lab Supplies can ship as a registered exporter to buyers in Tanzania, Uganda, the UAE, Saudi Arabia, Oman and the Philippines. Science Lab Supplies is registered for GST (GSTIN 06ADEPJ0574F2ZU). List the sizes and machines on the contact page, add each size as a line in the enquiry cart, or check bid requirements on the lab tender page.
Frequently Asked Questions
How far does the vice tilt and swivel?
It swivels through 360 degrees in the horizontal plane and tilts through 90 degrees vertically, with positive locking in the set position so it can withstand heavy cutting loads.
Which sizes are available?
Four sizes: 3, 4, 6 and 8 inch, with jaw widths of 75, 100, 150 and 200 mm and weights of roughly 8, 18, 42 and 76 kg.
Who supplies the Tilting and Swiveling Vice?
This vice is a supplied item from Science Lab Supplies, Ambala, India. Milling and drilling sections in ITI centres, polytechnics and TVET colleges can order it, as can distributors and tender contractors.
Can round work be held in the jaws?
Yes. The hardened and ground jaws have one vertical and two horizontal V-grooves that locate round bars and shafts securely for milling or drilling.
Related Workholding, Drilling and Milling Equipment
This vice is used on the milling and drilling machines of a training workshop, alongside a dividing head for indexed work and a plain drilling vice for straightforward jobs. The items below cover those machines and workholding options, including CNC milling trainers, and can be quoted together.
- Universal Dividing Head — offered in 115, 140 and 165 mm centre heights, all on a 1:40 worm.
- Drilling Machine Vice — close-grained cast iron body, in sizes from 3 to 8 inch.
- Radial Drilling Machine — electrohydraulic clamping locks the drill head, arm and sleeve.
- Pillar Drill Machine — 8 spindle speeds from 80 to 2550 RPM and 38 mm drilling capacity in steel.
- CNC Milling Machine Floor Model — worktable rated for a maximum load of 35 kg, with 280 mm X-axis travel.
- 8 Directional Vertical Milling — 70 x 330 mm table with two T-slots and 70 to 2800 RPM variable speed.
Browse the full Metal Manufacturing Training Machine range, the Welding Equipment and Workshop Lab Machine range for pillar drills, the CNC Trainer Machine range, or all TVET lab equipment.
Last updated: 9 October 2026
