Combi Hammer
Product Code : LSK-WT-10550
Combi Hammer (SKU LSK-WT-10550) is a 1000 W combination hammer for both drilling and chiselling in concrete, brick and stone. It comes complete in a box with four drill bits from 12 to 32 mm diameter and short pointed and flat chisels. Construction, plumbing and electrical workshops use it for breaking-out and heavy drilling practice. Science Lab Supplies supplies it from Ambala, India to technical institutes, contractors and distributors.
Specifications
Every technical detail of the Combi Hammer is listed in the table below. In short, it is a 1000 W hammer for drilling and chiselling on a 220 V, 50 Hz single-phase supply, supplied complete in a box with four drill bits from 12 x 400 to 32 x 450 mm and short pointed and flat chisels.
| Specification | Value |
|---|---|
| SKU | LSK-WT-10550 |
| Functions | Drilling and chiselling |
| Power | 1000 W |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Phase | Single phase |
| Drill bit 1 | 12 x 400 mm |
| Drill bit 2 | 20 x 400 mm |
| Drill bit 3 | 25 x 400 mm |
| Drill bit 4 | 32 x 450 mm |
| Pointed chisel | Short |
| Flat chisels | Short |
| Packing | Complete in box |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Combi Hammer
Trainees use the combi hammer to drill large holes for pipes, sleeves and anchors and to chisel chases, openings and damaged concrete. With bits up to 32 mm and two chisel shapes in the kit, one tool covers most breaking-out and heavy drilling tasks in a construction or building-services workshop.
- Plumbing and building-services trades (ITI Plumber, TVET modules): drilling sleeve holes and cutting pipe chases.
- Electrical installation courses: chasing walls for conduit and boxes.
- Masonry and building-construction workshops: breaking out concrete and trimming openings, with blocks cut to size on the masonry Saw.
- Renovation and repair practice: removing tiles, plaster and damaged concrete with the flat chisel.
Chiselling generates dust, noise and vibration. Trainees should wear eye protection such as Grinding Goggles, hearing and hand protection, and work under supervision.
Standard Scope of Supply
Each Combi Hammer is supplied complete in its box with the hammer unit, four drill bits (12 x 400, 20 x 400, 25 x 400 and 32 x 450 mm), a short pointed chisel and short flat chisels, as listed in the specification.
Packing, MOQ and Lead Time
We quote for a single combi hammer or a set for a whole class, and the quotation states the packing, delivery time and price for that quantity. Drills, grinders and other workshop tools for technical training institutes can share the same quotation and shipment.
Science Lab Supplies holds an Importer-Exporter Code as a registered exporter and can ship to buyers in Zambia, Rwanda, South Africa, Qatar, Sri Lanka and Vietnam. For the boxed 1000 W combi hammer, raise your enquiry on the contact page or list it in the enquiry cart; workshops procuring through a tender should consult the lab tender page.
Frequently Asked Questions
What comes with the Combi Hammer?
It is supplied complete in a box with four drill bits, 12 x 400, 20 x 400, 25 x 400 and 32 x 450 mm, plus a short pointed chisel and short flat chisels.
What power supply does it use?
It is a 1000 W tool for a 220 V, 50 Hz single-phase supply, so it plugs into a normal workshop socket rated for that load.
Who supplies the Combi Hammer?
Science Lab Supplies supplies it from Ambala, India, to ITI, polytechnic and TVET workshops, contractors and distributors, together with other power tools.
When should trainees use the Combi Hammer rather than an impact drill?
Use it for large holes up to 32 mm and for chiselling. A percussion drill is lighter for small holes, while the combi hammer handles heavier work in concrete.
Related Power Tools for Construction Training
Heavy drilling and chiselling sit alongside lighter drilling, cutting, grinding and tool upkeep in a construction workshop. These items from the Workshop Tools and related TVET ranges round out a power-tool bench with the combi hammer, and all of them can be listed on the same quotation.
- Rotary Hammer Drill — 600 W drill rated for 20 mm in concrete, supplied with three drill-bit sets from 6 to 16 mm.
- Impact Drilling Machine — 750 W percussion drill rated for 13 mm in steel and 40 mm in wood.
- Power Hand Drill — 600 W drill with 10 mm capacity at 1,250 rpm, offering impact and regular drilling, 2.1 kg.
- Bench Grinder — 580 W grinder with a 200 x 25 mm wheel at 3000 rpm and mounting holes.
- Hand Lever Shear — 200 mm blade cutting round bar and reinforcement steel up to 16 mm.
- Angle Grinder — 7 in wheel, 15 A motor, gear housing that rotates 90° for cutting, and spindle lock.
Browse the full Workshop Tools range, the Standard Welding Equipment Set for angle grinders and goggles, or all TVET lab equipment.
Last updated: 9 October 2026
