Scaffold Platform
Product Code : LSK-WT-10542
Scaffold Platform (SKU LSK-WT-10542) is a portable access unit that converts between five set-ups: extension ladder, step ladder, work platform, stairway ladder or two single ladders. Weighing 16 kg and rated for 150 kg, it gives painting, plastering, electrical installation and carpentry trainees safe working height in a workshop. Science Lab Supplies supplies it from Ambala, India to technical institutes, colleges, tender contractors and distributors.
Specifications
Every technical detail of the Scaffold Platform is listed in the table below. In short, one 16 kg folding unit works in five modes, reaching 2.7 m as an extension ladder and 1.6 m as a step ladder, or forming a 1.47 m deck 0.95 m above the floor, with a 150 kg maximum load.
| Specification | Value |
|---|---|
| SKU | LSK-WT-10542 |
| Modes of use | 5: extension ladder, step ladder, work platform, stairway ladder, 2 x single ladders |
| Extended height | 2.7 m |
| Step ladder height | 1.6 m |
| Platform height | 0.95 m |
| Platform length | 1.47 m |
| Maximum load | 150 kg |
| Weight | 16 kg |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Scaffold Platform
In vocational workshops the platform lets trainees reach ceilings, wall tops and high fittings without building full scaffolding. Because it changes between ladder and platform modes, one unit serves several trades and also teaches correct set-up, locking and load checks before anyone climbs.
- Electrical installation trades (ITI Electrician, TVET electrical modules): ceiling wiring, luminaire and conduit work, with fixing holes drilled by a Power Hand Drill.
- Painting, decorating and plastering courses: working along walls from the 1.47 m deck.
- Carpentry and building-construction workshops: fixing ceilings, frames and formwork at height.
- Work-at-height and site-safety sessions: choosing the right mode, respecting the 150 kg limit and wearing a Safety Helmet.
Standard Scope of Supply
The Scaffold Platform is supplied as a single folding unit as described above, ready to set up in any of its five modes. No separate parts are listed in the specification; any optional accessories are stated on the quotation.
Packing, MOQ and Lead Time
A quotation can be requested for one platform or for a set covering several workshop bays, and every quotation states the packing, delivery time and price for that quantity. Other workshop tools for technical training institutes, such as drills and grinders, can be priced on the same document.
With an Importer-Exporter Code as a registered exporter, Science Lab Supplies can ship to buyers in Tanzania, Uganda, the UAE, Saudi Arabia, Oman and the Philippines. Workshops planning access equipment can ask for the five-way scaffold platform to be quoted via the contact page or the enquiry cart, with tender requests directed to the lab tender page.
Frequently Asked Questions
How high can the Scaffold Platform reach?
Fully extended as a ladder it reaches 2.7 m. As a step ladder it stands 1.6 m high, and as a work platform the 1.47 m deck sits 0.95 m above the floor.
How much weight can it take?
The maximum load is 150 kg, and that figure includes the user plus any tools or materials carried. The unit itself weighs 16 kg, which makes it light to move between workshop bays.
Who supplies the Scaffold Platform?
Science Lab Supplies supplies it from Ambala, India, together with other construction and workshop items for training institutes, contractors and distributors.
Can one unit replace separate ladders?
For many workshop tasks, yes: it converts into an extension ladder, step ladder, stairway ladder, work platform or two single ladders. Trainees should check every lock before climbing.
Related Construction and Installation Tools
Work at height usually goes with drilling, fixing, levelling and lifting. These items from the Workshop Tools range can be used from a platform or ladder in construction and installation training, and all of them can be added to one quotation with the platform.
- Rotary Hammer Drill — 600 W drill rated for 20 mm in concrete, supplied with three drill-bit sets from 6 to 16 mm.
- Impact Drilling Machine — 750 W percussion drill rated for 13 mm in steel and 40 mm in wood.
- Combi Hammer — 1000 W drilling and chiselling hammer, boxed with 12–32 mm bits and pointed and flat chisels.
- Hoisting Equipment — chain hoist with a Class F crane-duty motor, failsafe conical disc brake and Grade 80 alloy steel load chain.
- Water Level — transparent, flexible 20 m long hose with fittings (armatures).
- Construction Site Saw Bench — galvanized machine table with foldable legs and a bayonet-mounted rear table.
Browse the full Workshop Tools range, the Woodworking Workshop Machines for drills and saws, or all TVET lab equipment.
Last updated: 9 October 2026
