Tube Bending Machine
Product Code : LSK-WEAWLM-10691
Tube Bending Machine (SKU LSK-WEAWLM-10691) is a hydraulic, electrically controlled pipe bender for forming tube and pipe below 8 in diameter to any angle from 0° to 180°. It works in manual or automatic mode and can make several bends in sequence without re-clamping. Fabrication, plumbing and mechanical workshops in TVET and polytechnic institutes use it for pipe-forming training. Science Lab Supplies supplies it from Ambala, India to institutes, fabrication units, tender contractors and distributors.
Specifications
The machine uses a hydraulic parallel integrated circuit in which each movement is controlled individually, and a three-section circuit with a cooling function that keeps the hydraulic oil from degrading. The spindle is thermally refined, the bending die is hand-forged from special steel, and an emergency stop device is built in.
| Parameter | Value |
|---|---|
| SKU | LSK-WEAWLM-10691 |
| Pipe size | Below 8 in (203 mm); suited to large-diameter pipe |
| Bending angle | 0° to 180°, freely adjustable |
| Drive | Hydraulic, parallel integrated circuit with individual movement control |
| Oil cooling | Three-section circuit with cooling function |
| Operation | Manual and automatic; electrically controlled host machine |
| Multi-bend | Several angles set and bent in turn without transfer |
| Feeding | Can be equipped with automatic feed length and angle setting |
| Construction | Thermally refined spindle; hand-forged special-steel bending die |
| Safety | Emergency stop device |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Tube Bending Machine
In training, the bender shows how pipe is formed to a drawing: marking bend positions, setting angles, allowing for springback and producing multi-bend parts such as offsets and U-bends. With automatic feed and angle setting it also introduces programmed, repeatable production bending.
- ITI Plumber and Sheet Metal Worker trades: pipe bending to set angles.
- Fabrication and welding modules: preparing bent pipe for frames and pipework.
- Polytechnic mechanical workshop practice: hydraulic forming and springback studies.
- TVET workshop equipment for industrial pipe-fitting programmes.
Hydraulic force and moving dies create crushing hazards. Keep hands clear of the die while bending, know where the emergency stop is, and operate only after instruction and under supervision.
Standard Scope of Supply
The Tube Bending Machine is supplied as a single unit as described above, with its hydraulic circuit, electrical controls and emergency stop. Die sizes, the automatic feeding option and supply voltage are not fixed in the specification, so they are agreed on the quotation for your pipe sizes.
Packing, MOQ and Lead Time
Quotations can be prepared for one machine for a fabrication workshop or several for a larger training centre, stating packing, delivery time and price for the quantity. Pipe clamps, a power hacksaw or a hydraulic pipe bender can be added to the same quotation.
As a registered exporter with an Importer-Exporter Code, Science Lab Supplies can ship to buyers in Iraq, Nigeria, Kenya, Ghana, Ethiopia and Tanzania. Enquire via the contact page or enquiry cart; see also the lab tender page.
Frequently Asked Questions
What pipe sizes can it bend?
Pipe and tube below 8 in (about 203 mm) diameter, including large-diameter pipe. Tell us the outside diameters and wall thicknesses you use so the right dies are quoted.
Can it make several bends in one part?
Yes. Different angles can be set and bent in turn without transferring the pipe to another machine, and an automatic feed length and angle setting can be added for repeat work.
Who supplies the Tube Bending Machine?
Science Lab Supplies supplies it from Ambala, India, as part of its welding and workshop machine range for technical training.
How is the operator protected?
The machine has an emergency stop device and electrical control of the hydraulic movements. Operators should still keep hands clear of the die and work under supervision.
Related Pipe and Fabrication Equipment
Pipe bending sits between cutting and welding in most fabrication courses. These four machines and tools from the TVET welding ranges cover those neighbouring steps and can be quoted together with the tube bender.
- Hydraulic Pipe Bending Machine — another hydraulic bender for pipe-forming practice.
- Power Hacksaw Machine — cuts pipe to length before bending.
- Pipe Welding Clamp — aligns bent sections for welding.
- Hydraulic Steel Worker — punching, shearing and notching of steel sections.
Browse the full Welding Equipment and Workshop Lab Machine range or all TVET lab equipment.
Last updated: 25 September 2026
