Electric Router
Product Code : LSK-WWM-10644
Electric Router (SKU LSK-WWM-10644) is an electric plunge router with an 1850 W motor that cuts grooves, rebates, housings and edge profiles in timber and board. Carpentry instructors use it in ITI, polytechnic and TVET woodworking workshops to teach joint-making and edge finishing. Training institutes, vocational schools, tender contractors and distributors can order this router from Science Lab Supplies, which dispatches it from its base in Ambala, India.
Specifications
Each rating and feature of this 1850 W plunge router has its own row below. Put briefly, a 15 A motor turns the 1/2 in (12.7 mm) collet at 23,000 rpm without load, plunge depth runs from 0 to 2-3/8 in with three presets, and a shaft lock and an all-ball-bearing build complete the design.
| Specification | Value |
|---|---|
| SKU | LSK-WWM-10644 |
| Rated power | 1850 W |
| Motor current | 15 A |
| No-load speed | 23,000 rpm |
| Voltage | 110 V / 60 Hz |
| Collet | 1/2 in (12.7 mm) |
| Bit shank sizes | 1/4 in or 1/2 in |
| Plunge capacity | 0 to 2-3/8 in (about 60 mm) |
| Preset plunge depths | 3 |
| Depth adjustment | Top-handle adjustment to set the routing depth |
| Bit change | Shaft lock |
| Bearings | All ball bearing construction |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Electric Router
The router is used for practical exercises in cutting housings, grooves, rebates and moulded edges, and for trimming joinery parts to a set depth. It suits carpentry and joinery training at ITI, polytechnic and TVET level, where trainees learn to set cutting depth, choose bits and guide a power tool under control.
- ITI Carpenter trade: routing grooves, rebates and housing joints for frames and cabinets.
- TVET carpentry and joinery modules: profiling the edges of furniture components, and cutting half-blind dovetails with the router guided by the template of the Dovetail Machine.
- Furniture and cabinet-making courses: trimming and shaping parts with guided bits, next to dowelled joints set out with the Dowel Master and tenons cut on the Tenoning Machine.
Standard Scope of Supply
The Electric Router is supplied as a single unit as described above, with the 1/2 in collet listed in the specification table. Router bits are consumables that each workshop chooses for its own exercises; if you need them or any optional accessories, ask for them to be added to the quotation.
Packing, MOQ and Lead Time
You can ask for a quotation for one router or for a complete woodworking workshop quantity, and each quotation from Science Lab Supplies sets out packing, delivery time and price for that quantity. Planers, sanders and other TVET workshop equipment can be listed on the same quotation.
As a registered exporter with an Importer-Exporter Code, Science Lab Supplies can ship to buyers in Malaysia, Peru, Egypt, Iraq, Nigeria and Kenya. Science Lab Supplies is registered for GST (GSTIN 06ADEPJ0574F2ZU). Mention the router SKU and your quantity on the contact page, collect it with other joinery tools in the enquiry cart, or turn to the lab tender page when the purchase runs through a formal bid.
Frequently Asked Questions
What is an electric router used for in a training workshop?
It cuts grooves, rebates, housing joints and edge profiles to a controlled depth, so trainees learn machine joinery and edge finishing. It is one of the standard workshop tools for technical training institutes.
Which router bits does this model accept?
It takes bits with a 1/4 in or 1/2 in shank, held in the 1/2 in (12.7 mm) collet. The shaft lock holds the spindle still while a bit is changed; unplug the tool first.
Does this router run on 230 V mains?
The specification lists 110 V / 60 Hz. Tell us your workshop mains supply through the contact page before ordering, so the quotation states clearly which voltage the offered unit is built for.
Who supplies the Electric Router?
The router is supplied by Science Lab Supplies from Ambala, India. ITIs, polytechnics, vocational schools, tender contractors and distributors can request a quotation directly, and other carpentry workshop machines can be grouped on the same order.
Related Woodworking Machines and Joinery Tools
These machines from the Woodworking Workshop Machines and Wood Workshop Portable Tool ranges cover moulding, mortising, planing, sawing, sanding and drilling, the operations that come before or after routing a joint or an edge, and any of them can share one quotation with the router.
- Spindle Moulder Machine — 30 mm spindle at 5000 or 7000 rpm, tilting to 45 degrees, with a 100 mm maximum moulding block width.
- Chisel Mortise Machine — 1 HP spindle motor at 3,400 rpm, taking chisels from 1/4 in to 3/4 in.
- Portable Planer — ratcheting depth knob sets cuts from 0 to 3/32 in (2.6 mm), with a bevel fence from 0 to 45 degrees.
- Jig Saw Machine — 24 in machine with a 12 x 12 in table and a 24 x 1.5 in cutting capacity.
- Orbital Sander Machine — 115 x 225 mm pad with a 6 mm sanding stroke at 3000 rpm.
- Power Hand Drill — 600 W drill with 10 mm capacity and an adjustable 360-degree side handle.
- Portable Circular Saw — 210 mm blade cutting 70 mm deep at 90 degrees, supplied with 3 blades.
Browse the full Woodworking Workshop Machines range, the Wood Workshop Portable Tool range for dovetail, mortise and moulding machines, or all TVET lab equipment.
Last updated: 9 October 2026
