Angle Grinder
Product Code : LSK-SWES-10694
Angle Grinder (SKU LSK-SWES-10694) is a handheld power tool with a 7 in wheel and a 15 A motor, used to grind, cut and clean metal. In welding and fabrication workshops trainees use it to bevel plate edges, remove slag and dress finished welds. Science Lab Supplies supplies this grinder from Ambala, India to ITIs, polytechnics, TVET colleges, tender contractors and distributors.
Specifications
All technical details of the grinder appear in the table below. In short, it is a 115 V, 15 A tool with a 7 in wheel, a rugged housing, ball and needle bearings, a spindle lock, a gear housing that rotates 90 degrees for cutting, soft start and an anti-dust varnish sealing the motor.
| Specification | Value |
|---|---|
| SKU | LSK-SWES-10694 |
| Type | Angle grinder |
| Wheel diameter | 7 in (about 178 mm) |
| Wheel compatibility | Accepts 7 in or 9 in wheels with the correct guards |
| Current | 15 A |
| Voltage | 115 V |
| Power source switch | AC/DC switch for use with alternative power sources |
| Control | On/Off |
| Handles | Back body grip and side rod handle |
| Side handle | Removable, mounts on either side |
| Gear housing | Rotates 90 degrees for cutting applications |
| Spindle lock | Yes, for easy wheel changes |
| Bearings | All ball and needle bearings |
| Start | Soft start, minimises kickback |
| Motor protection | Zig-zag anti-dust varnish sealing the motor from debris |
| Housing | Rugged |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Angle Grinder
In a training workshop the grinder is used for weld preparation and finishing: bevelling plate edges before welding, removing slag and spatter, cutting bar with a cut-off wheel and smoothing joints. It supports the ITI Welder and Fitter trades and TVET welding and fabrication modules.
- ITI Welder trade: bevel preparation of butt joints and grinding back root runs.
- ITI Fitter and Sheet Metal Worker trades: deburring stock cut on a Hacksaw Frame.
- TVET welding and fabrication: cleaning and dressing welds before inspection.
- Grinding weld coupons flush before they go on the Bend Test Equipment.
Fit only wheels rated for the tool, with the matching guard, and use the side handle. Trainees should wear grinding goggles, gloves and a Welders Apron, and work under supervision, keeping sparks away from people and flammable material.
Standard Scope of Supply
The Angle Grinder is supplied as a single tool with its removable side handle, as described above; any optional accessories are listed on the quotation. Grinding and cut-off wheels are consumables, so state the type and quantity you need on your enquiry.
Packing, MOQ and Lead Time
Send an enquiry for a single grinder or for a set of workshop tools for technical training institutes, and the Science Lab Supplies quotation will give packing, delivery time and price for that quantity. Goggles, gloves and welding machines from the same range can be quoted together.
As a registered exporter with an Importer-Exporter Code, Science Lab Supplies can ship to buyers in Ghana, Ethiopia, Tanzania, Uganda, the UAE and Saudi Arabia. The angle grinder can be quoted with other welding-bay tools: write via the contact page, add it to the enquiry cart, or use the lab tender page for a tender.
Frequently Asked Questions
What voltage does this grinder use?
The specification states 115 V with an AC/DC switch. Many workshops run on 220 to 240 V mains, so confirm your supply voltage when you enquire and the quotation will state the version offered.
Can it take a 9 in wheel?
The tool is listed with a 7 in wheel and accepts 7 in or 9 in wheels only when the correct guard for that size is fitted, so order the matching guard with larger wheels.
Who supplies the Angle Grinder?
Science Lab Supplies supplies it from Ambala, India, alone or as part of a welding workshop quotation for ITIs, TVET colleges, contractors and distributors, with wheels listed on the same quotation.
What protective gear should trainees wear?
Trainees should wear grinding goggles, gloves and close-fitting clothing, and grind with the guard in place. Sparks and fragments travel far, so keep a clear area around the work.
Related Grinding, Cutting and Welding Equipment
The grinder sits between cutting, welding and protection in a fabrication workshop. These items from the welding range and two other TVET ranges cover bench grinding, powered and manual shearing, hand finishing, the welding process the grinder prepares joints for, and eye and hand protection.
- Grinding Goggles — clear goggles against flying particles when grinding and chipping.
- Bench Grinder — 200 x 25 mm wheel at 3000 rpm, 580 W.
- Electric Shear — 620 W, cuts 3.2 mm mild steel and 2.5 mm stainless steel.
- Manual Hand Shear — 12 in blade, cuts 70 x 6 mm flat steel and 13 mm rod.
- Shielded Metal ARC Welding Machine — 440 V three-phase stick welder for prepared joints.
- Flat File — bastard, second-cut and smooth grades, 4 to 14 in long.
- Welding Leather Gloves — split leather gloves with cotton lining.
Browse the full Standard Welding Equipment Set range, the Workshop Tools range for bench grinders, drills and shears, or all TVET lab equipment.
Last updated: 9 October 2026
