Volumetric Flask
 (1).png)
Product Code : SCL-LG-11971
Volumetric Flask (SKU SCL-LG-11971) is a borosilicate 3.3 glass measuring flask used to make a solution up to one defined final volume, for standard solutions, dilutions of stock and quantitative analysis. It suits chemistry practicals in schools, colleges and universities, and analytical work wherever a concentration must be exact. Science Lab Supplies, operating from Ambala in India, can quote it singly or in quantity for institutions, tender contractors and distributors.
Specifications
Each row of the table below covers one fact about this borosilicate 3.3 flask. In short, it is made to hold one fixed volume when filled to its mark, rather than to measure a range of volumes, and the nominal capacity you need is confirmed on the quotation together with the quantity.
| Specification | Value |
|---|---|
| SKU | SCL-LG-11971 |
| Type | Volumetric measuring flask |
| Product category | Laboratory glassware |
| Material | Borosilicate 3.3 glass |
| Primary function | Preparation and dilution of liquids to a defined final volume |
| Capacity | Confirmed on the quotation |
| Contents | One volumetric flask |
| Handling | Inspect for chips or cracks before use; avoid thermal shock and mechanical stress |
| Care | Clean promptly with a compatible method; no abrasive tools on the glass or markings |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Volumetric Flask
A volumetric flask is the vessel for preparing solutions of known concentration. A weighed solid or measured stock is dissolved, topped up with solvent until the meniscus sits on the mark, then mixed, giving a solution ready for titration, calibration standards or further dilution.
- NCERT Class 11–12 chemistry practicals: preparing standard oxalic acid or Mohr's salt solution for titration, dissolving the solid first with a 20 cm Glass Stirring Rod.
- B.Sc. analytical chemistry: making calibration standards and serial dilutions, with small aliquots delivered by a Pipette Graduated 0.1ml.
- Water-testing and quality labs: diluting samples and stock solutions to a set volume before colour comparison in a Nessler Cylinder.
- Teaching solution preparation and molarity calculations in school laboratories.
Check the flask for chips or cracks before use, approach the mark slowly to avoid overfilling, and label each solution once it is mixed.
Standard Scope of Supply
Each line is one Volumetric Flask in borosilicate 3.3 glass, and the quotation states the capacity supplied. Stoppers or any other accessories you want with the flask can be added as separate lines, along with pipettes, burettes and beakers for the same titration bench.
Packing, MOQ and Lead Time
Quotations are available for a few flasks or for a full chemistry laboratory, and each one details the packing, delivery time and price for that quantity. Pipettes, burettes and beakers can share the quotation, so a school volumetric flask in India order can cover a complete titration apparatus set.
Science Lab Supplies is a registered exporter with an Importer-Exporter Code and can ship to buyers in Ethiopia, Tanzania, Uganda, the UAE, Saudi Arabia and Oman. Tell the team the capacities you need through the contact page, line up flasks and pipettes in the enquiry cart, or follow the lab tender page for a formal tender.
Frequently Asked Questions
What is the Volumetric Flask made of?
It is made of borosilicate 3.3 glass, the heat- and chemical-resistant glass widely used for laboratory glassware, which suits routine solution preparation in teaching and analytical labs.
Which capacity will I receive?
The flask is offered without one fixed capacity. State the nominal capacity and quantity you need through the contact page, and the quotation confirms capacity, closure and any accuracy class before you order.
Who supplies the Volumetric Flask?
Flasks for single classrooms, analytical laboratories and bulk or tender requirements are quoted and dispatched by Science Lab Supplies, whose office is in Ambala, India.
Can a volumetric flask be heated?
Avoid thermal shock. Dissolve solids with gentle swirling at room temperature and let warm solutions cool before making up to the mark, because temperature changes affect the volume the flask holds.
Related Volumetric and Titration Glassware
Solution preparation and titration need more than one vessel. These items from the Lab Glassware, Glassware Burette and Laboratory Funnel ranges weigh, measure, transfer and titrate the solutions made up in the flask, and they can be listed with it on one quotation for borosilicate laboratory glassware in India.
- Volumetric Pipette 5ml — borosilicate pipette in 5, 10, 20, 25 and 50 mL capacities with amber-stain markings.
- Borosilicate Glass Burette 50ml — borosilicate 3.3 barrel with a straight-bore PTFE stopcock plug.
- Measuring Cylinder Glass — graduated cylinders from 10 mL to 500 mL for approximate volumes.
- Borosilicate Beaker — 250 mL low-form beaker with a pouring spout.
- Weighing Bottle — clear glass with a ground-glass joint and stopper for weighed solids.
- Borosilicate Conical Flask — flat base and narrow neck for swirling during titration.
- Burettes Class B — borosilicate glass with a PTFE needle valve stopcock and amber print.
- Funnel — offered in diameters from 25 mm to 100 mm for filling narrow necks.
Browse the full Lab Glassware range, the Laboratory Flasks range, or all school lab equipment.
Last updated: 9 October 2026
.jpg)
.jpg)
.jpg)
.jpg)
.png)
.jpg)
.jpg)
.png)