Separating Funnel Gilson Solid Glass Stopcock
Product Code : LSK-LF-10399
Separating Funnel Gilson Solid Glass Stopcock (SKU LSK-LF-10399) is a Gilson-pattern separatory funnel whose flow is controlled by an all-glass stopcock key, available with a PE stopper on the neck. It suits liquid–liquid separation and extraction practicals where a traditional glass key is preferred. Science Lab Supplies, operating from Ambala, India, can put it on quotations for schools, colleges, pharmacy institutes, contractors and distributors.
Specifications
The table below covers each specification of the glass-key Gilson funnel. In short, it follows the Gilson pattern with a solid glass stopcock in bores of 2.5, 4 or 6 mm, a polyethylene stopper is available, and six capacities run from 50 ml to 2000 ml for classroom and preparative extractions.
| Specification | Value |
|---|---|
| SKU | LSK-LF-10399 |
| Pattern | Gilson |
| Stopcock type | Solid glass |
| Stopcock bore | 2.5, 4 or 6 mm |
| Stopper | Available with PE stopper |
| Capacities | 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, 2000 ml |
| Supplied by | Science Lab Supplies, Ambala, India |
Applications and Experiments for the Gilson Glass-Stopcock Separating Funnel
With this funnel, students can partition a solute between water and an organic solvent, then draw off the lower layer through the glass stopcock. It fits extraction and separation experiments in higher-secondary chemistry, undergraduate organic labs, pharmacognosy practicals and routine sample preparation in testing laboratories.
- Class 12 chemistry: separating a mixture of two immiscible liquids, with the funnel set in a ring of a Laboratory Stand.
- B.Sc. chemistry: determining a distribution (partition) coefficient, with each layer run into Beakers, Tall form, Without Spout for titration.
- B.Pharm pharmacognosy: extracting plant constituents into a solvent layer and keeping it in a Flask Erlenmeyer with Screw Cap.
- Testing labs: washing and drying organic extracts before analysis.
A glass key seals well with a thin film of stopcock grease; wipe it and the barrel clean after use so the key does not seize.
Standard Scope of Supply
You receive the Gilson funnel with its solid glass stopcock in place, in the bore and capacity you specify, with a PE stopper available. Stopcock grease, stands, rings and holders can be quoted as separate lines on the same quotation if your bench needs them.
Packing, MOQ and Lead Time
Our team can quote one funnel or a class set in several capacities for a chemistry laboratory. The quotation spells out the packing, delivery time and price for your quantity, and holders or other items from our stock as a laboratory glassware supplier in India can be added on the same page.
Holding an Importer-Exporter Code, Science Lab Supplies as a registered exporter can ship to buyers in Qatar, Sri Lanka, Vietnam, Malaysia, Peru and Egypt. For a class set or a single glass-key funnel, write in via the contact page or pick sizes into the enquiry cart; the lab tender page sets out supply against published tenders.
Frequently Asked Questions
Why choose a solid glass stopcock?
A glass key is the traditional choice for teaching labs: it is inert to most solvents and matches the glass barrel exactly. It needs a light grease film, unlike a PTFE key.
Is there a PTFE version of this funnel?
Yes. The Separating Funnel Gilson PTFE Stopcock is the same Gilson pattern with a PTFE key, made in the same 2.5, 4 and 6 mm bores and the same 50 ml to 2000 ml capacities.
What capacities and bores can be ordered?
Capacities are 50, 100, 250, 500, 1000 and 2000 ml, and bores are 2.5, 4 and 6 mm. Any capacity can be quoted with any bore, so name both on your enquiry.
Who supplies this Gilson funnel?
Educational institutions, laboratories and tender contractors can obtain a quotation for it from Science Lab Supplies in Ambala, India, either on its own or grouped with other separating funnels.
Related Separating Funnels and Holders
These items round out an extraction bench: the PTFE-key twin of this Gilson funnel, pear, cylindrical and Squibb funnels with a choice of stopcocks, an enamel-printed PTFE key model, a 125 ml spherical glass separator and a polypropylene holder that supports them on a rod while the layers settle.
- Separating Funnel Gilson PTFE Stopcock — PTFE stopcock with a PE stopper option, up to 2000 ml.
- Separating Funnel Pear shape — stem inside cone; needle valve, PTFE or solid glass stopcock.
- Separating Funnel Cylindrical — needle valve or PTFE stopcock, PE stopper, socket and cone.
- Separating Funnel Squibb Shape — graduated or ungraduated versions, 2.5 to 6 mm bore.
- Separating Funnel with PTFE Key Stopcock — PTFE key and PE stopper, 125 ml to 2000 ml.
- Separating Funnel (Separator) — 125 ml spherical clear glass with tap and frosted stopper.
- Separatory Funnel Holder — front opening gives a clear view of the solution.
Browse the full Laboratory funnel range, the Chemistry Lab range, or all school lab equipment.
Last updated: 9 October 2026
